First, the weekly maintenance content of the incubator 1. Check the water level of the humidification water tray. 2. Check the sealing condition of the door. 3. Check the ventilation and exhaust conditions. 4. Clean up the fluff and other debris on the damper rotating screw to prevent it from getting stuck and rotating. 5. Wipe the outside of the chassis and control cabinet with a semi-dry rag, and clean the humidifying basin for each batch of hatchers. and remove the fluff from the top of the machine.
Second, the monthly maintenance content of the incubator 1. Check whether the fan, humidification, and egg turning chain are in good condition. 2. Check the heating function. 3. Check the ultra-high temperature alarm function. 4. Check whether the egg turning function is normal. 5. Thoroughly clean and disinfect the equipment. 6. After each batch of incubation, the machine, humidified water basin and humidified evaporation tray should be cleaned.
Third, the incubator is maintained every three months 1. Clean the probe. 2. Calibrate temperature and humidity. 3. Add butter to the fan bearing once. 4. Clean the egg turning worm gear with oil and add butter to lubricate. 5. Butter should be added to the lead screw and sliding fit parts of the damper mechanism. 6. The oil should be changed once for humidification and egg turning reducer. 7. Comprehensively check the control function of each system.
Fourth, the maintenance of the incubator machine when it is not used for a long time Before the machine is not used for a long time, the machine must be turned on to heat up and dry the machine, the water in the humidified water basin must be cleaned and dried, and each running part should be washed and protected with butter to prevent rust. This is very important. If you decide not to use a machine and don't maintain it as described above, the next time you want to use it, it may be out of order.